Hello Guest, if you're reading this it means you have not yet registered. Please take a second, Click here to register and in a few simple steps, you will be able to enjoy all the many features of our fine community. Please take a few minutes and introduce yourself in the section for you to meet the members of our community.
To remove these and other advertisements, become a site supporter and donate.
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: noobish engine ???

  1. #1 Default noobish engine ??? 
    Join Date
    Apr 2007
    Location
    Eglin AFB FL
    Posts
    76
    Are head kit motors better? Why? etc whats the difference?:confused:

    Reply With Quote  

  2. #2 Default  
    Join Date
    Feb 2007
    Posts
    1,195
    I run a head kit motor, I would say they are no better. Posibly even worse, the reason I say this is because there is more chance of something going wrong. But on the other hand if you want you can really play around with diffrent compression ratios. This is the reason I picked one up, even know I have yet to play around with diffrent ratios. I will still at some time be running this motor with alchol!

    The TS head kits are better, ask ddm about these! Lots more money, but better built.
    Last edited by Akela; 04-19-2007 at 05:03 AM.

    Reply With Quote  

  3. #3 Default  
    Join Date
    Feb 2007
    Location
    Campbell River, BC
    Posts
    3,291
    Real Name
    Clayton
    What about the ONeill motors?

    Reply With Quote  

  4. #4 Default  
    Join Date
    Feb 2007
    Posts
    1,195
    Lots of debate going on about head kit motors. With the heads being a 2 peace design there is a greater chance of developing a leak in them causing an overlly lean condition, or worst. I've never had this problem but have heard of others that have. Oneill head kit motors are the same as ddm's.

    Reply With Quote  

  5. #5 Default  
    Join Date
    Feb 2007
    Location
    Nuuk, Greenland
    Posts
    85
    The top Tuners only mod standard engines, as they can safely be tuned to a higher degree than the Head kit engines.

    But out of the box, the Head Kit engines produce a bit more power, than the standard Engines.

    For the BLING effekt I like the Head kit, but as I want reliability as well, I run a Standard head, that has been race ported (DDM 29cc Race portet kit)

    Happy Racing
    Jesper Rex, Nuuk, Greenland
    FG Leopard Race, 29cc race ported DDM SiKK conversion, Elcon'ized and Sensor'ized
    Reply With Quote  

  6. #6 Default  
    Join Date
    Apr 2007
    Location
    Eglin AFB FL
    Posts
    76
    Hmm, I get it. thanx. Imlon @ this http://www.davesmotors.com/store/product1017.html but want it race ported. I want a 36mm bore w/ 28mm suffed crank.

    Reply With Quote  

  7. #7 Default  
    Join Date
    Feb 2007
    Location
    Campbell River, BC
    Posts
    3,291
    Real Name
    Clayton
    Whats the difference in the engine Accord boy posted and this one other than $10.00 and slightly more HP?
    http://oneillbrothersracing.com/rcca...ion/st29rc.htm


    Does the goped engine have lots of torque and lower RPM?

    Reply With Quote  

  8. #8 Default  
    Join Date
    Feb 2007
    Posts
    1,195
    Mlocker, these are 2 diffrent motors all together. the first is a 28.5 and the second is a 29. Oneill's sells the same motor with clutch and stuffed crank for the same price http://oneillbrothersracing.com/rcca...ackstuffed.htm

    For 80 bucks more you can get this same motor race ported

    Reply With Quote  

  9. #9 Default  
    Join Date
    Feb 2007
    Posts
    1,195
    Accord boy, would you consider doing a big bore kit on your stock motor? Its alot cheaper. http://oneillbrothersracing.com/rccar/cylinders.htm
    Look on this page there are many choices.

    Reply With Quote  

  10. #10 Default  
    Join Date
    Feb 2007
    Location
    Campbell River, BC
    Posts
    3,291
    Real Name
    Clayton
    I have the bigbore kit, $89.00 plus with the X Can and the buggy Rocks!

    Reply With Quote  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. engine porting
    By frenchy83 in forum Engines/Exhaust
    Replies: 35
    Last Post: 05-10-2008, 07:39 PM
  2. Engine Question?
    By tarzan13 in forum Engines/Exhaust
    Replies: 13
    Last Post: 05-21-2007, 07:44 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •