Hello Guest, if you're reading this it means you have not yet registered. Please take a second, Click here to register and in a few simple steps, you will be able to enjoy all the many features of our fine community. Please take a few minutes and introduce yourself in the section for you to meet the members of our community.
To remove these and other advertisements, become a site supporter and donate.
  • Currently Active Users

    There are currently 73 users online. 0 members and 73 guests

    Most users ever online was 1,539, 10-14-2019 at 09:32 AM.

  • Modified RC Losi 5ive-T Center Diff Mount

    This center diff mount set features extra wide feet on the top and bottom of the uprights, this prevents rocking when the diff mount contacts the clutch housing during extreme chassis flex. Bearing removal is made easy with the use of O-rings in the bearing bores, they allow a nice snug fit without using a press fit on the aluminum bearing bores. Also includes: 1- Two huge 15x28x7 diff bearings, the rear bearing has a custom inner race modified for this application. 2- Four brake actuator bearings(top and bottom, front and rear). 3- Four different sets of brake screws so you can run single or dual brakes on the front or rear, in any combination you choose. 4- Two nylock nuts(for front) and two thin nuts(for rear) for locking the brake adjustment screws in position.

    5- Two aluminum lower brake disc guides to keep the discs in line, they work with single and dual brakes(front and rear) and are easy to remove and attach. 6- Four extra long mounting screws to mount the uprights to the chassis. 7- Four extra long mounting screws to mount the uprights to the top plate. 8- Two small O-rings that slide over the brake actuators and against the top plate, so the upper brake bearings in the top plate stay clean.
    Comments 1 Comment
    1. mradlin's Avatar
      mradlin -
      That looks like a really nice setup!
      Any one here getting one?
  • HTML Connect with us!

    Join 5th Scale Forum on Facebook!

    Follow 5th Scale Forum on Twitter!
  • 5thscale Tag Cloud Random picture from member albums

    FG Leoprad Race body off JetPro pipe installed
    FG Leoprad Race body off JetPro pipe installed by mradlin
    100 0956
    100 0956 by mradlin
    Same as above but in full view
    Same as above but in full view by Hitokiri_2000
    S8000577 by jimmyb1
    CIMG0126 by DemonRC